Archives for posts with tag: Ignition 2.0

Most products that we use in our daily lives go through some form of testing before they are launched into the market. This is an important step to verify user safety, environmental compliance, and ultimately a positive overall experience. Have you ever thought about how your office furniture is tested? Here at HON we have an A2LA Certified Product Test Lab, an A2LA Certified Pack Lab, a Parts Approval Lab and a Color Lab, so you could say we take our testing very seriously!

IMG_6896

HON engineers test Empower Benching above and beyond BIFMA with 7900 lbs on 20 stations!

The first test we conduct is part-specific, and it takes place in what we call our Parts Approval Lab. For this test, we scan our parts with a laser and the software generates a 3D color map that will tell us exactly how much, if any, the part varies from the print. For example, when we model the back of a chair, we scan those parts to verify that all contours are exactly how we modeled it.

The second test validates our colors, and this takes place in our Color Lab. Dedicated members verify the colors of each part match the exact color composition that is specified, regardless of the material that is used. We check for consistency so parts don’t vary, which gets us the same great look every time.

The third test is shipment testing, where we simulate what could happen during the shipping and handling process. This category has three areas:

  1. Compression testing – simulates products being stacked in a warehouse
  2. Drop testing – simulates the possibility of products being dropped during a delivery or installation
  3. Vibration testing – simulates placing the packaged product in a semi-trailer to make sure the packaging doesn’t cause any scratches

We pay attention to details and obsess over small things, so we even go as far as testing in both freezing and humid climates to make sure our packaging can withstand any end destination.

The fourth test is structural and fatigue testing to ensure the safety of the end user. This testing simulates different situations in which the end users may find themselves, such as an individual putting books into an overhead in a panel system.

To deliver long-lasting products, we also test fatigue scenarios, such as the “caster durability” test.  In this test we simulate the chair rolling for a pre-determined distance to ensure the casters will remain dependable through the lifetime of the product.

These are abusive tests, meaning the forces we use are beyond what would be generated in normal use. Using both BIFMA test standards and our own, we make sure the safety of the end user is not in jeopardy.

The fifth test looks at the user interface and it includes standards that HON created to guarantee the consistent comfort of our products. For example, have you ever thought about the amount of force required to push the button for raising and lowering your task chair arms? Well, our engineers did, and alas a test standard was written for it! We standardize on this to make sure the user experience is as comfortable as possible.

The last test is what we call Live Environment Testing. Considering we work in an office ourselves, we are often asked the question “would you use this product in your own office?”. So, to answer this question, we made it a test requirement! As part of our full test plan, our engineers seek out members in the office with fresh eyes to the product and ask them to test it out. For example, I was once asked to use a prototype Ignition® 2.0 task chair at my workstation for a few days and provide feedback. This test is also a fun way for HON to engage with our community, such as getting feedback from the local community college or doctor’s office. After this process, the project teams compile the feedback and make any final improvements to the product. This type of testing is very important to make sure we can deliver the best possible product.

So, now you know the science behind what it takes to deliver the best office furniture on the market. If you would like to see inside our test lab, check out this video and be sure to visit hon.com to view our product brochures!

“BIFMA” stands for “Business + Institutional Furniture Manufacturers Association”, and it is the “not-for-profit trade association for business and institutional furniture manufacturers”. They create and maintain the industry safety standard, as well as sustainability standard, and educate customers on the importance of product performance. You can read more about BIFMA here.

“A2LA” stands for “American Association for Laboratory Accreditation” and it is an organization that gives accreditation to all types of laboratories in accordance with ISO (International Organization for Standardization) standards. At HNI we place such a high value on quality assurance that we go through this accreditation process and gain the accountability of this third-party. You can read more about A2LA here .

Advertisements

It’s the remix to Ignition,
you know HON’s on a mission
to keep you rollin’ at work
and have all your coworkers wishin’
their chairs were made here at HON.
That’s how we get things done.
Seating is evolving, baby, your workday’s about to get fun…

Ok, I had to! But even the most perfect parody song doesn’t tell the full story of the evolution of Ignition.  As HON’s best-selling seating line, it seemed an impossible feat to find even one way to make it better (let alone over 10, but who is counting?). But HON knew that, if the workplace was evolving, its furniture needed to evolve with it.

1336-1351-1003_Hon Ignition_Open area_1Ignition was first introduced in 2009 as an all-in-one seating solution to provide the perfect fit for every body type, work style and office activity. HON recognized that personalized comfort energizes a workforce, and this idea quickly sparked new designs that ignited a movement toward a host of ergonomic and aesthetic enhancements to help you work better.

Why personalization? The ability to personalize Ignition 2.0 is how we deliver your perfect fit. Take advantage of 4 new custom controls, stabilize your back with an easy-to-adjust lumbar support, or modify the quick-adjust back to adapt to your specific needs and preferences. Choose between a Black frame and the new Titanium option, then pick from an expanded fabric selection to coordinate with an existing office aesthetic or just show off your personal style.

Why comfort? Ignition 2.0. was designed to comfortably, flexibly, dynamically move you to change the world. Tailored to your body, new molded seat foam invites you to sit in your chair, rather than on it. The enhanced back design now includes ilira®-stretch mesh that flexes in every direction to create a soft, responsive feel and target support where it’s needed most – no matter what your workday brings.

Ignition StudioStill looking for more reasons to love Ignition 2.0?

Let me hear you whoot, whoot, because we’ll give it to you cheap, cheap!

(Last song reference, I promise!) A knocked down (KD) version of the task chair with patent-pending Quick Connect arms is also available, offering slimmer packaging and allowing Ignition 2.0 to reach a lower price point than ever before.

And last, but not least. When you buy Ignition chairs, you’re not just buying inspired practical solutions – you’re buying quality, American designed, engineered and assembled furniture backed by a lifetime warranty and a network of dealers.

DesignedInUSA_200x100

Visit the spotlight page at hon.com/ignition to learn more, or follow the story on social media using the hashtag #Ignitionhasevolved.

Hon Ignition_CoverShotTI_Extended

%d bloggers like this: